FOUR BAR & TWO
BAR ROTARY CUTTING MACHINE
 Four
Bar Rotary Cutting and Creasing machine is useful for Creasing and Cutting
simultaneously. The machine is with two pairs
of shafts. The front pair is with cutting
dies and rear pair is with creasing die. The lower shafts of each
pair can
be raised or lowered by revolving side wheel.
For easy feeding two guides are provided.
Technical Specification
Size
|
Speed/minute
ft./min
|
Minimum distance between two dies |
Power required
|
Floor space
|
Gross weight
in Kgs. |
65"
75"
85"
95" |
|
3"
3"
3"
3" |
1.5 H.P.
2 H.P.
2 H.P.
2.5 H.P. |
85"x52"
98"x52"
110"x52"
120"x60" |
1700
2100
2300
2500 |
BOX STITCHING MACHINE
Technical Specification
| Straight Stitcher |
Also available in arm length of 20", 30",
36", 42", 48" in Angular Machine |
| Bottom Sealing Stitcher |
Maximum depth of carton 34" & 44"
only |
| Flap Sealing Stitcher |
While stitching on this machine one side of
the box's flap should be overlapped |
| Size of Machine |
20",30",36",48",60"
Angular & Straight head |
| Gross Weight (Appx.) |
380 Kg. packed in two cases |
| Net Weight |
240 Kg. |
| Space Required |
58" x 24" |
| Speed |
300 Stitches Per minute |
| Stitching Capacity |
Two ply to Nine ply |
| Motor |
1/2 H.P., Three or Single phase |
| Wire Required |
12 x 25 S.W.G., 17/25 S.W.G. 21 S.W.G. |
LAMINATION MACHINE
A
self adjusting head allows for wide variations of thickness in the print
stock
Delivery of finished lamination
is through the back of the laminator to rewind
shaft. Sheets may be separated immediately if desired.
Machine is easy to operate
and control and all electrical controls are housed in a neat
penal board mounted unit easily controlled by operator.
Maintenance of the machine
is negligible and access to all parts of the machine is quick
and simple.
Technical Specification
| Laminating Width (Max) |
600 mm (24") x any length |
| Speed maximum |
600 mts./Hour (1800/Hour) |
| Electrical requirements |
750 Watts single phase |
| Poser Load |
1.75 KW |
| Roll Width (Film) |
600 mm (24") max |
| Roll Dia (Film) |
300 mm (12") min |
| Dimensions |
1800 mm (L) x 1500 mm (W) x 1950 mm (H) |
| Weight approx. |
900 kgm. |
ALL KINDS OF KNIVES
Paper
Cutting
Metal Guillotine
Blades
Wood Planers
Wood Chippers
Peeling Knives
Plastic Cutter and Tobacco
Knives etc.
|
Four Bar Rotary Cutting Machine
Box Stitching Machine
Lamination Machine
Knives
|
